Menü
Manual 30 and 50
To enjoy the Tulipiippu Fire, please follow the instructions below and study the instructions leaflet carefully. You will be amazed how easy the use of Tulipiippu pellet burner is.
Step by step
- Please fill up the combustion
chamber with adequate amount of wood pellets. Drop moisten pellets or
kindling to the bottom of the fire tube. Make sure the air intake from air
tube to fire tube is open. Put the coverlid on.
- Put the burner into the
fireplace in such a way that the air intake tube is facing towards you.
Make sure the burner does not touch the fireplace inside-walls. The pellet
burner must stand upright and steady while functioning. Make sure there is
good airflow in the front of the fireplace.
- Light soaked pellets or
kindling trough the air intake tube with a long match stick or a piece of
paper. The ignition phase might take 5-10 minutes.
- The flame should be about 50cm
(1.5 feet)
high. Do not take the burner out from the fireplace and let all fumes be
evacuated through the chimney of the fireplace until the burner has cooled
down completely.
